Home > Windows にまつわる e.t.c.

.RDP ファイルパラメーター


RDP ファイルのパラメーターを一覧にまとめてみました。(翻訳に自信が無いので英語のまま ^^;)

オリジナル情報は以下のページから入手できます

<RDP Settings for Remote Desktop Services in Windows Server 2008 R2>
http://technet.microsoft.com/en-us/library/ff393699(WS.10).aspx

 

コマンド 説明 文法 意味 default
Administrative session This setting configures the client computer to connect to the administrative session of the remote computer. This setting is the same as the /admin parameter used with mstsc.exe. administrative session:i:<value> 0 When connecting to the remote computer, do not use the administrative session.
1 When connecting to the remote computer, use the administrative session.  
Alternate full address This setting specifies an alternate name or IP address of the remote computer that you want to connect to by using Remote Desktop Connection (RDC). alternate full address:s:<value> A valid computer name, IPv4 address, or IPv6 address Specifies the remote computer to which you want to connect  
Audiocapturemode This setting determines how sounds captured on the local computer are handled when you are connected to the remote computer by using Remote Desktop Connection (RDC).
This setting corresponds to the selections in the Remote audio area on the Local Resources tab under Options in RDC.
audiocapturemode:i:<value> 0 Do not capture audio from the local computer (Do not record).
1 Capture audio from the local computer and send to the remote computer (Record from this computer).  
Audiomode This setting determines how sounds on a remote computer are handled when you are connected to the remote computer by using Remote Desktop Connection (RDC).
This setting corresponds to the settings in the Remote audio area on the Local Resources tab under Options in RDC.
audiomode:i:<value> 0 Play sounds on the local computer (Play on this computer)
1 Play sounds on the remote computer (Play on remote computer)  
2 Do not play sounds (Do not play)  
Audioqualitymode This setting determines the audio playback quality on the local computer. audioqualitymode:i:<value> 0 Dynamically adjust audio quality based on available bandwidth.
1 Always use medium audio quality.  
2 Always use uncompressed audio quality.  
Authentication level This setting determines what Remote Desktop Connection (RDC) should do when server authentication fails.
This setting corresponds to the selection in the If server authentication fails drop-down list on the Advanced tab under Options in RDC.
authentication level:i:<value> 0 If server authentication fails, connect to the computer without warning (Connect and don’t warn me).  
1 If server authentication fails, do not establish a connection (Do not connect).  
2 If server authentication fails, show a warning and allow me to connect or refuse the connection (Warn me).  
3 No authentication requirement is specified.
Autoreconnection enabled This setting determines whether the client computer will automatically try to reconnect to the remote computer if the connection is dropped; for example, when there is an interruption of network connectivity.
This setting corresponds to the Reconnect if the connection is dropped check box on the Experience tab under Options in Remote Desktop Connection (RDC).
autoreconnection enabled:i:<value> 0 Client computer does not automatically try to reconnect.  
1 Client computer automatically tries to reconnect.
Autoreconnect max retries This setting determines the maximum number of times the client computer will automatically try to reconnect to the remote computer if the connection is dropped, for example, when there is an interruption of network connectivity. autoreconnect max retries:i:<value> A number Specifies the maximum number of times the client computer will attempt to automatically reconnect to the remote session. 20
Bitmapcachepersistenable This setting determines whether bitmaps are cached on the local computer. Bitmap caching can improve the performance of your remote session by storing frequently used images on the local computer. bitmapcachepersistenable:i:<value> 0 Bitmap caching is not enabled.  
1 Bitmap caching is enabled.
Compression This setting determines whether bulk compression is enabled when it is transmitted by RDP to the local computer. compression:i:<value> 0 RDP bulk compression is not enabled.  
1 RDP bulk compression is enabled.
Connection type This setting configures the client computer’s connection speed.
This setting corresponds to the selections for Choose your connection speed to optimize performance on the Experience tab under Options in Remote Desktop Connection.
connection type:i:<value> 1 When connecting to the remote computer, set the connection speed to Modem (56 Kbps).
With this setting, the following are allowed:
Persistent bitmap caching
 
2 When connecting to the remote computer, set the connection speed to Low-speed broadband (256 Kbps – 2 Mbps).
With this setting, the following are allowed:
Visual styles
Persistent bitmap caching
3 When connecting to the remote computer, set the connection speed to Satellite (2Mbps – 16 Mbps with high latency).
With this setting, the following are allowed:
Desktop composition
Visual styles
Persistent bitmap caching
 
4 When connecting to the remote computer, set the connection speed to High-speed broadband (2Mbps – 10 Mbps).
With this setting, the following are allowed:
Desktop composition
Visual styles
Persistent bitmap caching
 
5 When connecting to the remote computer, set the connection speed to WAN (10 Mbps or higher with high latency).
With this setting, the following are allowed:
Desktop background
Font smoothing
Desktop composition
Show window contents while dragging
Menu and window animation
Visual styles
Persistent bitmap caching
 
6 When connecting to the remote computer, set the connection speed to LAN (10 Mbps or higher).
With this setting, the following are allowed:
Desktop background
Font smoothing
Desktop composition
Show window contents while dragging
Menu and window animation
Visual styles
Persistent bitmap caching
Important
This setting is required to use Microsoft RemoteFX.
 
Desktopheight This setting determines the resolution height (in pixels) on the remote computer when you connect by using Remote Desktop Connection (RDC).
This setting corresponds to the selection in the Display configuration slider on the Display tab under Options in RDC.
desktopheight:i:<value> Numerical value from 200 to 2048 Resolution height (in pixels) of remote session desktop The default value is set to the resolution on the local computer.
Desktopwidth This setting determines the resolution width (in pixels) on the remote computer when you connect by using Remote Desktop Connection (RDC).
This setting corresponds to the selection in the Display configuration slider on the Display tab under Options in RDC.
desktopwidth:i:<value> Numerical value from 200 to 4096 Resolution width (in pixels) of remote session desktop The default value is set to the resolution on the local computer.
Devicestoredirect This setting determines which supported Plug and Play devices on the client computer will be redirected and available in the remote session when you connect to a remote computer by using Remote Desktop Connection (RDC).
This setting corresponds to the selections for Other supported Plug and Play (PnP) devices under More on the Local Resources tab under Options in RDC.
devicestoredirect:s:<value> No value specified Do not redirect any supported Plug and Play devices.
* Redirect all supported Plug and Play devices.  
DynamicDevices Redirect any supported Plug and Play devices that are connected later.  
The hardware ID for the supported Plug and Play device Redirect the specified supported Plug and Play device.  
Disable ctrl+alt+del This setting determines whether the CTRL+ALT+DELETE security attention sequence is required to enter credentials after you are connected to the remote computer. disable ctrl+alt+del:i:<value> 0 Require the CTRL+ALT+DELETE security attention sequence on the remote computer.
1 Do not require the CTRL+ALT+DELETE security attention sequence on the remote computer.  
Disableprinterredirection This setting determines whether Easy Print printer redirection is enabled when connecting to the remote computer. disableprinterredirection:i:<value> 0 Easy Print printer redirection is enabled.
1 Easy Print printer redirection is not enabled.  
Disableclipboardredirection This setting determines whether Clipboard redirection is enabled when connecting to the remote computer. disableclipboardredirection:i:<value> 0 Clipboard redirection is enabled.
1 Clipboard redirection is not enabled.
Displayconnectionbar This setting determines whether the connection bar appears when you are in full screen mode when you connect to a remote computer by using Remote Desktop Connection (RDC).
This setting corresponds to the Display the connection bar when I use the full screen check box on the Display tab under Options in RDC.
displayconnectionbar:i:<value> 0 The connection bar does not appear.  
1 The connection bar appears.
Domain This setting specifies the name of the domain in which the user account that will be used to log on to the remote computer by using Remote Desktop Connection (RDC) is located.
The value of this setting, along with the value of the username setting, will appear in the User name text box on the General tab under Options in RDC.
domain:s:<value> A valid domain name Specifies the name of the domain that will be displayed in RDC There is no default value.
Enablecredsspsupport This setting determines whether RDP will use the Credential Security Support Provider (CredSSP) for authentication if it is available. enablecredsspsupport:i:<value> 0 RDP will not use CredSSP, even if the operating system supports CredSSP.  
1 RDP will use CredSSP, if the operating system supports CredSSP.
Full address This setting specifies the name or IP address of the remote computer that you want to connect to by using Remote Desktop Connection (RDC).
This setting corresponds to the entry in the Computer text box on the General tab under Options in RDC.
full address:s:<value> A valid computer name, IPv4 address, or IPv6 address Specifies the remote computer to which you want to connect There is no default value.
Keyboardhook This setting determines how Windows key combinations are applied when you are connected to a remote computer by using Remote Desktop Connection (RDC).
This setting corresponds to the selection in the Keyboard drop-down list on the Local Resources tab under Options in RDC.
keyboardhook:i:<value> 0 Windows key combinations are applied on the local computer (On this computer).  
1 Windows key combinations are applied on the remote computer (On the remote computer).  
2 Windows key combinations are applied in full-screen mode only (Only when using the full screen).
Load balance info This setting specifies the provider name, endpoint type, and an endpoint. loadbalanceinfo:s:<value> String Load-balancing information used to choose the best server for the client computer. For more information about LoadBalanceInfo, see (http://msdn.microsoft.com/en-us/library/aa381177(VS.85).aspx). There is no default value.
Negotiate security layer This setting determines whether or not RDP negotiates the security layer. negotiate security layer:i:<value> 0 Security layer negotiation is not enabled and the session is started by using Secure Sockets Layer (SSL).  
1 Security layer negotiation is enabled and the session is started by using x.224 encryption.
Pinconnectionbar This setting determines whether or not the connection bar should be pinned to the top of the remote session upon connection. pinconnectionbar:i:<value> 0 The connection bar should not be pinned to the top of the remote session.  
1 The connection bar should be pinned to the top of the remote session.
Prompt for credentials on client This setting determines whether or not Remote Desktop Connection (RDC) prompts for credentials when connecting to a server that does not support server authentication. prompt for credentials on client:i:<value> 0 RDC will not prompt for credentials when connecting to a server that does not support server authentication.
1 RDC will prompt for credentials when connecting to a server that does not support server authentication.  
Redirectclipboard This setting determines whether the Clipboard on the client computer will be redirected and available in the remote session when you connect to a remote computer by using Remote Desktop Connection (RDC).
This setting corresponds to the Clipboard check box on the Local Resources tab under Options in RDC.
redirectclipboard:i:<value> 0 The Clipboard on the local computer is not available in the remote session.  
1 The Clipboard on the local computer is available in the remote session.
Redirectcomports This setting determines whether the COM (serial) ports on the client computer will be redirected and available in the remote session when you connect to a remote computer by using Remote Desktop Connection (RDC).
This setting corresponds to the Ports check box under More on the Local Resources tab under Options in RDC.
redirectcomports:i:<value> 0 The COM ports on the local computer are not available in the remote session.
1 The COM ports on the local computer are available in the remote session.  
Redirectdrives This setting determines whether drives on the client computer will be redirected and available in the remote session when you connect to a remote computer by using Remote Desktop Connection (RDC).
This setting corresponds to the selections for Drives under More on the Local Resources tab under Options in RDC.
redirectdrives:i:<value> 0 The drives on the local computer are not available in the remote session.
1 The drives on the local computer are available in the remote session.  
Redirectprinters This setting determines whether printers configured on the client computer will be redirected and available in the remote session when you connect to a remote computer by using Remote Desktop Connection (RDC).
This setting corresponds to the selection in the Printers check box on the Local Resources tab under Options in RDC.
redirectprinters:i:<value> 0 The printers on the local computer are not available in the remote session.  
1 The printers on the local computer are available in the remote session.
Redirectsmartcards This setting determines whether smart card devices on the client computer will be redirected and available in the remote session when you connect to a remote computer by using Remote Desktop Connection (RDC).
This setting corresponds to the selection in the Smart cards check box under More on the Local Resources tab under Options in RDC.
redirectsmartcards:i:<value> 0 The smart card device on the local computer is not available in the remote session.  
1 The smart card device on the local computer is available in the remote session.
Screen mode ID This setting determines whether the remote session window appears full screen when you connect to the remote computer by using Remote Desktop Connection (RDC).
This setting corresponds to the selection in the Display configuration slider on the Display tab under Options in RDC.
screen mode id:i:<value> 1 The remote session will appear in a window.  
2 The remote session will appear full screen.
Server port This setting determines which TCP port the Remote Desktop Protocol (RDP) will use when you connect to the remote computer by using Remote Desktop Connection (RDC). server port:i:<value> Hexadecimal value Specifies the port to connect to on the remote computer. The default value is 0xD3D.
Session bpp This setting determines the color depth on the remote computer when you connect by using Remote Desktop Connection (RDC).
This setting corresponds to the selection in the Colors drop-down list on the Display tab under Options in RDC.
session bpp:i:<value> 15 High color (15 bit) The default value is set to the color depth on the local computer.
16 High color (16 bit)
24 True color (24 bit)
32 Highest quality (32 bit)
Smart sizing This setting determines whether or not the client computer can scale the content on the remote computer to fit the window size of the client computer. smart sizing:i:<value> 0 The client window display of desktop will not be scaled when resized.
1 The client window display of desktop will be scaled when resized.  
Span monitors This setting determines whether the remote session window will be spanned across multiple monitors when you connect to the remote computer by using Remote Desktop Connection (RDC). span monitors:i:<value> 0 Monitor spanning is not enabled.
1 Monitor spanning is enabled.  
Usbdevicestoredirect This setting determines which supported RemoteFX USB devices on the client computer will be redirected and available in the remote session when you connect to a remote session that supports RemoteFX USB redirection by using Remote Desktop Connection (RDC).
This setting corresponds to the selections for Other supported RemoteFX USB devices under More on the Local Resources tab under Options in RDC.
usbdevicestoredirect:s:<value1>[;<value2>…] No value specified Do not redirect any supported RemoteFX USB devices.
* Redirect all supported RemoteFX USB devices for redirection that are not redirected by high-level redirection mechanisms.  
{Device Setup Class GUID} Redirect all supported RemoteFX USB devices that are members of the specified device setup class.  
USB\InstanceID Redirect a supported RemoteFX USB device specified by the given instance ID.  
-USB\InstanceID Do not redirect a supported RemoteFX USB device specified by the given instance ID, even if the device is in a device setup class that is redirected.  
Username This setting specifies the name of the user account that will be used to log on to the remote computer by using Remote Desktop Connection (RDC).
The value of this setting, along with the value of the domain setting, will appear in the User name box on the General tab under Options in RDC.
username:s:<value> A valid user name Specifies the user account that will be displayed in RDC. There is no default value.
Use multimon This setting configures multiple monitor support when you connect to the remote computer by using Remote Desktop Connection (RDC).
If the client computer is running Windows 7 and the server you are connecting to is running Windows Server 2008 R2, you should use this RDP setting instead of the Span monitors RDP setting.
use multimon:i:<value> 0 Do not enable multiple monitor support.
1 Enable multiple monitor support.  
Videoplaybackmode This setting determines if Remote Desktop Connection (RDC) will use RDP efficient multimedia streaming for video playback. videoplaybackmode:i:<value> 0 Do not use RDP efficient multimedia streaming for video playback.  
1 Use RDP efficient multimedia streaming for video playback when possible.
Winposstr This setting specifies the position of the Remote Desktop Connection (RDC) window on the client computer. winposstr:s:<value> 6 numbers separated by commas Represents a string form of the WINDOWSPOS structure. For more information about the WINDOWSPOS function, see http://msdn2.microsoft.com/en-us/library/ms632612.aspx. The default value is 0,3,0,0,800,600.
Workspace id This setting defines the RemoteApp and Desktop ID associated with the RDP file that contains this setting. workspaceid:s:<value> A valid RemoteApp and Desktop Connection ID Specifies the RemoteApp and Desktop Connection ID associated with the RDP file. There is no default value.

 

 

Copyright © MURA All rights reserved.